Telebooth Acoustic Claims: Which Test Reports Should Buyers Request?

Telebooth Acoustic Claims: Which Test Reports Should Buyers Request?

Acoustic performance claims can be difficult to compare when purchasing a phone booth for the workplace. For procurement teams evaluating Telebooth phone booth sound insulation, the key is to look beyond marketing figures and request test reports that show how performance was measured. This guide explains which acoustic standards, testing conditions and supporting documents to check, helping buyers assess competing products and make more confident purchasing decisions.

The practical question is not simply whether a booth reduces sound. It is whether the quoted reduction applies to the complete booth, in a configuration close enough to the one being purchased, and under conditions relevant to the intended office. A figure without that context can make two very different products look equivalent.

Start with the complete-booth test report

Ask each supplier for the full acoustic report for the assembled booth, not just a certificate, brochure extract or test result for a wall panel. The report should identify the sample, the method used, the testing organization, the measured results and any relevant limitations. If the supplier offers only a summary, request the underlying report and enough detail to verify that it covers the proposed model.

A complete enclosure includes more potential sound paths than a material sample: the door perimeter, glazing connections, ventilation openings, cable entries and joints between panels all matter. A strong result for an individual glass or wall component cannot establish the insulation of the finished booth.

Check the tested unit against the quotation. Dimensions, door type, glazing, ventilation design and internal fittings may differ across a product family. If the report covers another size or a previous version, ask the supplier to explain the differences and provide supporting evidence rather than treating the results as interchangeable.

Read the standard and the metric together

ISO 23351-1 is a relevant standard to ask about because it addresses measurement of the speech level reduction of furniture ensembles and enclosures. A supplier citing it should identify the reported metric and provide the test conditions and frequency-band results, not merely place the standard’s name beside a decibel figure.

Other acoustic standards may be relevant to components or building elements. For example, ISO 10140 concerns laboratory measurement of sound insulation of building elements. Such data can help evaluate construction materials, but it is not automatically a complete-booth result. Likewise, a result expressed as STC or Rw should not be treated as directly equivalent to a booth speech-reduction value without understanding the methods and assemblies behind both figures.

Pay attention to the direction of the measurement. A report may assess speech from inside the booth to the surrounding area, from outside to inside, or both. Those address related but different concerns: keeping a conversation less audible to colleagues and protecting the caller from office noise. Neither a single rating nor the term “soundproof” guarantees that speech will be unintelligible.

Ask what was operating during the test

A closed, unoccupied booth with its ventilation switched off is not necessarily representative of a working video call. Review the report for the door position, fan status and speed, source and microphone positions, background noise, frequency range and any deviations from the stated method. If a detail is missing, ask the supplier or testing organization for clarification.

Ventilation deserves separate attention. Airflow openings can influence sound transmission, while the fan itself can add noise inside the booth. Request operating-noise measurements at the settings employees are expected to use, together with the measurement method and microphone position. A quiet fan at its lowest setting is less helpful if the booth needs a higher setting to remain comfortable during meetings.

Also request airflow data for the supplied configuration and ask how it was measured. Nominal fan capacity, airflow through a complete installed booth and perceived comfort are not the same thing. Occupancy, meeting duration and local ventilation requirements should inform the final assessment.

Use a quoted figure as a starting point, not a verdict

Consider a larger meeting enclosure alongside a single-person phone booth. The TB-ML 2400 Soundproof Meeting Booth is described with a 28–30 dB sound-insulation claim and external dimensions of 2400 × 2400 × 2300 mm. The supplied product information refers to an SGS or Institute of Acoustics, Chinese Academy of Sciences test report. Before using that range in a comparison, request the applicable report and confirm the tested model, acoustic metric, method and operating conditions.

The same model’s stated maximum ventilation volume is 720 m³/h, but that number alone does not establish airflow at every control setting or the noise level during a meeting. Those details become particularly relevant when a booth is intended for several occupants rather than one caller.

This distinction also matters across modular enclosure applications. A focus booth, an airport changing lounge and a private banking suite may all use enclosed structures, yet their privacy, occupancy and operating requirements differ. Evidence for one configuration should not be assumed to validate another; specialized uses, including purification cabins, may require additional project-specific documentation.

Verify the laboratory and the scope of its work

An independent testing organization’s name is useful, but it is not a substitute for reading the report. Check the report date, issuing laboratory, sample identification and whether the document is complete. Where accreditation matters to the purchase, confirm the laboratory’s accreditation status and whether the specific test method was within its scope at the time of testing.

A test report records the result for the sample and conditions described. It does not automatically certify every production unit, installation or future design revision. Ask how the manufacturer controls changes to seals, panels, glazing and fans, and whether a material design change triggers a new assessment. For a substantial order, the answer can be as consequential as the original test result.

Translate acoustic evidence into a comparable cost

The cheapest quoted booth may not be the least expensive solution if it needs relocation, replacement seals or additional site work to meet the intended use. Ask suppliers to quote against the same specification and separate the booth price from delivery, installation, commissioning, maintenance and any future relocation costs.

Include these points in the comparison:

  • The exact model and options covered by the acoustic report and the quotation.
  • Door-seal adjustment, ventilation checks and any installation work included in the price.
  • Availability and cost of replacement seals, fans and other service parts, plus the warranty terms.
  • Electrical connection, site access, floor requirements and any local approvals that must be confirmed for the project.
  • Whether dismantling or moving the booth requires trained installers and how reassembly affects warranty coverage.

For a multi-unit purchase, a pilot installation can help expose issues that a laboratory report cannot settle: door operation on the actual floor, fan audibility during calls and the effect of nearby conversations. Agree in advance on the evaluation procedure, fan setting, typical occupancy and who will carry out any acoustic measurements. An informal listening check is useful feedback, but it should not be presented as a standardized test result.

Before signing off, place the report reference, configuration and any agreed performance verification in the purchase documents. If a supplier cannot explain what its decibel claim measures or provide evidence for the booth being quoted, treat that uncertainty as a procurement risk—not as a minor gap to resolve after installation.

    Previous page:Already the first
    Next page:Already the last